Tag: Smart Home

Time to grow some data…

Last weekend I decided to build a monitoring system for the planter boxes on my deck. I wanted to collect data on soil moisture and light levels from at least two of the 4 planter boxes. The issue is that I don’t have a place to plug it all into and I want to log the data using Google Sheets so that I can graph everything.

20190515_185135

20190515_185310

So I grabbed a solar panel, whipped up a voltage regulator, connected a rechargeable battery and that took care of the battery. For the microcontroller I used a Particle Photon, mostly due to it’s abundance of analog read pins, and connected a Spark Fun soil sensor with an added photo-resister for light readings. The Photon reads the analog value of each sensor and adds a new row into my Google Sheets doc via IFTTT. After the data is sent the Photon goes into deep sleep mode every 10 minutes. This makes it so that the sensor sips power and can easily last using only solar power.

So here is the Data:

My next step is to collect enough data to flag events that I want to be notified about. Like when the water level gets low enough to were I should water my plants, or when my plats are about to die due to extreme dryness. I can also see how much daylight a particular box is getting so I know what plants need to go where. If I had access to a water outlet I could have that automatically water the garden, but for now my water bucket works well enough.

 

 

One Step Closer to Plug and Play ESP devices

For those of you that know me, I am kinda big on the ESP8266 WiFi enabled chip for IOT. I do use the Arduino IDE for coding these chips and have integrated aspects of automatic setup much like consumer IOT products use. The one thing that has been tricky is in setting up things like MQTT feeds and even the MQTT credentials on setup. Continue reading One Step Closer to Plug and Play ESP devices

Top Smart Home recommended devices

For quite a few years I have tried out many devices for smart homes and lived with them to figure out what works most consistently. For myself, there is also a need for things to share information and allow for automatons that use complex logic. An example of this is that while I do want my lights to turn on when I get home, I only want them to do so if it is dark outside and at a brightness that reflects the time of day that I am getting home. This kind of automation requires many devices to share information across my network, but some devices make that process easier than others. With that in mind, here are my recommendations on smart home devices that play nice with each other. Continue reading Top Smart Home recommended devices